The Gigabyte GeForce RTX 2060 Windforce OC 6G is an interesting new graphics card that provides the ability to enjoy many of today’s top-tier games. The graphics card has a decent level of performance, adequate size. The compact model provides proper functionality and at the same time is offered at a reasonable cost in contrast to similar models. However, keep in mind that the video card test uses special software which you can learn at https://animavie.org/

Dimensions and appearance

The graphics card has 4 outputs: three of them are DP 1.4 and the fourth one is HDMI 2.1. Thanks to this set, it is possible to connect several monitors at once. There is a single power connector with 8 pins.

The black graphics card is 265mm long, while its height and width are 120mm and 40mm respectively. The graphics card has 2 slots, and the weight is quite light considering the compact parameters.

Memory and Main Parameters of Gigabyte GeForce RTX 2060 Windforce OC 6G Graphics Card

The card features GDDR6 SDRAM memory, which is 6GB. It is built with Micron chips. The memory has an effective frequency of 14 GHz. The memory transfer bus comes with a 192 bit memory bandwidth. The physical memory frequency is 3500 MHz, while the effective frequency reaches 14000 MHz.

There are 30 GPU compute blocks, with a total of 64 GPU operations per block. It also features 120 texturing and 48 rasterization blocks. Power consumption in 3D mode is 164W, while in 2D mode it’s 25W. Sleep mode requires only 11 watts at all.

The graphics card does not get multiprocessor support, and up to 4 receivers can be connected in total to provide a single image. The basis of the model is an aluminum heatsink. It includes 2 heat pipes made of pressed copper. These interact with the GPU chip.

On top of the heatsink is observed to have two fans. They are characterised by the same rotational speed. The other side of the device is equipped with a plate. The special attachment gives the whole structure the necessary rigidity, and also cleverly complements the overall design of the graphics card.

Noise and backlighting

When the 2D mode is connected, where the temperature is kept under 45.3 degrees Celsius and the fans have been suspended, the noise level reached 18dBA. A similar figure is noted in a relatively quiet room. That is, the card is conditionally silent at these settings. A similar noise level was noted when watching movies where hardware decoding is present.

Setting maximum load, which is present in 3D mode at 72 degrees Celsius and rotation of fans to 2392 revolutions/minute, noise level reached 40.5 dBA, which is already considered loud by gradation.

There’s no originality in the form of backlighting for the Gigabyte GeForce RTX 2060 Windforce OC 6G graphics card. The only thing it is capable of in this regard is reflecting light falling on it from other devices.